Installing a run of fencing using individual featheredge boards provides a sturdy, durable, and attractive boundary. Here’s a quick guide to help you through the process:
1. Plan and Measure
- Begin by measuring the length of the area where the fence will be installed. This will help you determine the number of posts, gravel boards, and featheredge boards required.
- Mark the positions for the fence posts, typically spaced 6 feet apart.
2. Install the Posts
- Dig post holes at each marked location, ensuring they are deep enough to secure the posts firmly (usually about 600mm to 900mm deep).
- For Arris Rails set the notched fence posts in the holes, using concrete to secure them. Ensure each post is vertically aligned using a spirit level.
- Allow the concrete to set before proceeding.
3. Attach the Gravel Boards
- Once the posts are secure, attach the timber gravel boards at the base of the posts. Gravel boards provide a barrier between the ground and the featheredge boards, protecting them from moisture and prolonging their lifespan.
4. Fit the Arris Rails
- Slot the arris rails into the notched posts, ensuring they are level and secure. The triangular shape of the arris rails allows for efficient water runoff, helping to prevent water damage to the fence.
- Depending on the height of the fence, you may need two or three rails per section.
5. Install the Featheredge Boards
- Start at one end of the fence and nail the first featheredge board to the arris rails, ensuring it is level and vertically aligned.
- Continue adding boards, overlapping each board slightly (usually about 25mm) to create a continuous, solid surface. This overlapping design provides additional privacy and stability.
6. Add a Capping Rail
- Once the featheredge boards are in place, install a capping rail along the top edge of the fence. The capping rail serves both a protective and decorative purpose, shielding the top of the boards from rainwater and enhancing the overall appearance of the fence.
- Secure the capping rail to the top of the posts and featheredge boards using appropriate screws or nails, ensuring it is aligned evenly across the length of the fence.
7. Finishing Touches
- Once all the boards and capping rails are in place, check the entire fence for stability and make any necessary adjustments.
- Consider applying a wood preservative or stain to the featheredge boards and capping rail to protect them from the elements and enhance their appearance.
Top Tips
- Ensure Even Spacing: Consistent spacing between posts and the overlap of the featheredge boards is key to a neat and professional finish.
- Use Quality Materials: Opt for pressure-treated timber for posts, rails, and boards to ensure longevity and resistance to decay.
- Secure Fixings: Use galvanized nails or screws to prevent rusting and ensure a long-lasting fence.